55 percent alloy coated steel sheet in coils

1. Metallic-Coated Products and Specifications

The composition of the aluminum-zinc alloy used in 55% Al-Zn coatings has been proven to outlast galvanized steel by two to four times, depending on the environment. Building panels fabricated from 55% Al-Zn alloy-coated steel sheet will provide many years of trouble-free service when properly designed, installed and maintained.

ALUMINUM- ZINC ALLOY COATED STEEL SHEET (ALU-ZINC)

The alloy coating comprises about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc. Namely, it has been well accepted as a preferred alternative to both galvanized steel sheets and aluminum coated steel sheets in such areas as roofing and walling, rain water goods, automotive components, and home China 55% Zinc Aluminum Alloy Coated Steel Sheet in Coil Alu-Zinc coating:30-275 G/M2. Coil weight:4-5 mton max. Coil ID:508mm. We are always special in galvanize steel coils 0.14-0.6mmx914mmxcoil and 0.13-0.35mmx750/762mmxcoils. (3) galvanized corrugated steel sheet (galvalume/prepainted color sheet) Thickness:0.12-0.4mm. Width:/650mm/670mm/800mm/900mm.

Coated Al Aluminum Sheet Supplier In Vietnam

Suppliers Matching Coated Steel (Product And Company,US. 10 coils hot dipped al -zn alloy coated steel yu steel ltd vietnam manufacturer 15 coils prime 55 percent aluminum-zinc alloy - coated s teel prime 55 percent aluminum-zinc alloy - coated steel sheet . o and k Cold Rolled Steel Coils & Sheets Manufacturer - HENGZECold Rolled Steel Coil has superb sheet shape and surface quality with good flatness and surface finish. The surface of the cold sheet is clean and bright and easy for coating. 45-55 (DQ Grade) Yield Strength:270 (CQ Grade) 240 (DQ Grade) high-carbon steel and alloy steel. The specification is 0.15~1.5mm x 1250mm. Quality Control.

Hot Dipped Galvanized Steel Sheet Coil -

Shandong Changfa Sheets Co., Ltd., located in Guanxian, China Galvanized Sheet Hometown, can annually produce over 200,000 tons of 750-1,250mm galvanized sheets, in the double coating thickness of 50-180g and the roll weight of 7-8 tons Our company, founded in Sept. 2010, is located in Guan County Industrial Park, Liaocheng City, known as one of the important portals of western area in IS 15961 (2012):Hot Dip Aluminium-Zinc Alloy Metallic 3.4 Aluminium/Zinc Alloy Coating A hot-dip coating composed of 55 percent aluminium, balance zinc and incorporating minor addition of control elements. This type of coating normally has a post treatment for perseverance. 3.5 Surface Finish 3.5.1 Normal The un-altered 55 percent aluminium zinc crystal structure that occurs during solidification of a hot-dip coated steel sheet. It will be denoted by

Import Data and Price of aluminium sheet coil under HS

55 percent aluminium-zinc alloy coated steel sheet in coil:south korea:chennai sea: Import Data and Price of zinc coated steel under HS Code 55:nov 18 2016:72107000:prime quality prepainted aluminum zinc alloy coated steel sheet in coils size:0.80mm(bmt)x912mmxc:south korea:thar dry port icd/ahmedabad:kgs:230,030:12,725,013:55:nov 11 2016:72109090:prime ppgl az70(pre painted steel coils coated with zinc andaluminium galvalume) 0.47tctx1220mmxc ral 5012:

JIS G 3322:2005 Prepainted hot-dip 55 % aluminium-zinc

Aug 01, 2005 · This Japanese Industrial Standard specifies the prepainted hot-dip 55 percent aluminium-zinc alloy-coated steel sheets and coils, produced by coating and baking durable synthetic resin paint uniformly on either one or both surfaces of hot-dip 55 percent aluminium-zinc alloy-coated steel sheets and coils, using coil-reduced base metal specified in JIS G 3321. NY I85174 - The tariff classification of coated steel The product to be imported is Galvalume coated steel sheet in coils made to ASTM Specification A 792, the Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. The master coil measures 45.175 inch in width, and the sheet will be imported slit to size.

Prepainted Galvalume Coil - China Galvanized Steel

It is coated with aluminum plate (including 55 percent aluminum, 43.5 percent zinc, 1.5 percent silicon) as the base plate, and the color coating can be pre-coated on top. The different colors can be Prepainted Hot Dip 55% Aluminium Alloy Coated Strip Coil, JSA - JIS G 3321 - Hot-dip 55 % Aluminium-zinc Alloy. scope:This Standard specifies requirements for hot-dip 55 % aluminium-zinc alloy-coated steel sheet (hereafter referred to as sheets), steel strip (hereafter referred to as coils), and corrugated sheet manufactured by processing sheets into the shapes and dimensions specified in JIS G 3316 (hereafter referred to as corrugated sheets).

Q195 Aluminum zinc coated steel plate

May 11, 2020 · The coating consists of 55% aluminum, 43.4% zinc and 1.6% silicon by weight, respectively.The production process of aluminized zinc plate is similar to that of galvanized steel plate and aluminum plate.55 percent aluminum zinc alloy coated aluminum zinc plate has superior corrosion resistance when both sides are exposed to the same environment South Korean Steel Coils Suppliers, Manufacturers Pre-painted Hot-Dipped Galvanized Steel Sheet (in Coil) confirming to JIS G3312 CGCC - Coating Top side:5 micron primer + 20 micron Regular Polyester Paint + Protective Film (50 micron) Back side:5~7 micron Epoxy service coating - Base metal:Hot-Dipped Galvanized Steel (JIS G3302 SGCC Zinc 120~180g/m2) - Coil Inner Diameter:508 mm or 610 mm - Coil weight:2 MT Max.

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc

1. Scope. 1.1 This specification covers 55 % aluminum-zinc alloy-coated steel sheet in coils and cut lengths. 1.2 This product is intended for applications requiring Steel Coils Manufacturers Suppliers of Steel Coils coils on skids in envelopes tinned steel sheets in strips hs code 72124080 177. 8 mm x 0. 25 mm 399528017 399528018 399528019 prepainted hot dip 55pct aluminium-zinc alloy coated steel coil. see all 10,959 results with a panjiva subscription 14 coils bare 55 percent al-zn steel shee t in coil14coils bare 55 percent al-zn steel

Unpainted GalvalumeTM Steel Fact Sheet

ArcelorMittal produces Galvalume coated steel sheet in the US and Canada and is the exclusive producer in Canada. The Galvalume coating is an alloy composed of 55% aluminum and approximately 45% zinc by weight. It is applied on both sides of cold-rolled steel sheet using a precise continuous hot dip process. The result is ZINCALUME Steel Grade 33 Grade Data SheetZINCALUME® Steel Grade 50 (Class 1) Grade Data Sheet General Description ZINCALUME® Steel Grade 50 (Class I) - hot-dip zinc/aluminum alloy-coated structural steel with a spangled sur- face and guaranteed minimum yield strength of 50 ksi with good ductility.

[Product Manual] HOT-DIP ZINC- COATED STEEL COILS

5.1.3. ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvanneal) by the Hot-Dip Process. Table 4 Chemical Composition follow ASTM A653 (Mild Steel) Unit:% Grade EDDS CS Type Ab,c,d c,d CS Type Bb,e CS Type Cb,c,d b,f FS Type A FS Type the Hot-Dip Process1A 755/A 755M Specication for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products A 792/A 792M Specication for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

zinc alloy coated steel coil, zinc alloy coated steel coil

Coated Coils Zinc Alloy Steel Coil PPGL Coating Color Coated Aluminum Coils 55% Aluminium Zinc Alloy Coated Steel Coil US $650.00-$670.00 / Ton 1 Ton (Min. Order)55 Aluminum-Zinc Alloy Coated Steel Grade Data SheetsGrade Data Sheet 55% Aluminum-Zinc Alloy Coated Steel - hot-dip al uminum & zinc alloy coated structural steel with guaranteed minimum yield strength. Meets ASTM A792-09 specifications/requirements. * Design must allow for some strength reduction near welds. ** Maximum thickness suitable for organic coil coating is 0.0466. GRADE 33

Leave Your Response